Before a factory chooses "how to bond", it chooses "with what". This section covers the edge material itself: thin PVC tape, durable ABS, the technological laser edge with its built-in fusible layer for seamless activation, veneer for premium projects and MDF edging for non-standard tasks.
The section explains which thicknesses and widths the iFurn.pro catalogue supports, the criteria a technologist uses to pick the right edge for a particular project — and why the tape width must not be smaller than the board thickness, or the edge stays "bare" along the rim and treacherously reveals the raw cut.
Separately — what makes choosing the "right" edge different from picking one that simply "matches the colour", and why a good edge starts long before the part reaches the machine.
The world of edge banding has three giants. PVC — mass-market, affordable, irresistibly diverse in colours and textures. ABS — the older brother: stronger, greener, noticeably more expensive. Laser edge is its own story:…
ReadIf you ever walk into a furniture store and run your hand along the edge of any cabinet, nine out of ten times you will be touching polyvinyl chloride edging — PVC. This is the tape on which almost the entire mass furnit…
ReadIf PVC is the "standard", ABS is the "smart move". A little more expensive, noticeably stronger, no chlorine in the composition, and at ease with eco-certifications. An uninitiated eye will not see the difference at firs…
ReadWalk up to an expensive wardrobe in a modern apartment. Run a finger along the edge of a door. If you cannot feel the thin joint line between the front and the edge, and the edge looks like a continuation of the surface …
ReadWhen the mass-market PVC, ABS and laser do not fit, materials from a different row take the stage: veneer — for "real wood" — and MDF edging — for parts under paint and unusual geometry. Both are used rarely, but without…
ReadAn edge tape is measured by two numbers. The first is its thickness — how much it stands proud above the panel surface. The second is its width — whether it covers the edge along its full height. A mistake in either of t…
Read