#778

The SOLIDWORKS button on the order creation screen opens the import of a 3D assembly from SolidWorks. It takes a single STEP file — .stp or .step — with the whole assembly: one assembly becomes one project. A ZIP archive with a single STEP inside can be chosen as well. File size is up to 128 MB.

How to bring an assembly in

  1. In SolidWorks, open the assembly and save it as STEP AP214 or STEP AP242.
  2. In iFurn.pro, on the order creation screen, click "SOLIDWORKS", then "Select STEP or ZIP" and pick the file.
  3. Check the parts, the CNC operations, the materials and the edging before passing the result to the editor.

What is read from the file

  • Sheet parts with their sizes and their position in the assembly — the preview shows the whole 3D assembly. A part is a panel from 0.4 to 80 mm thick whose two surface sides are at least 30 mm each.
  • Drillings, grooves and milling — from the STEP geometry: round holes, narrow rectangular grooves, and the other recesses and contours of the part.
  • Materials — by thickness and by the colour of the bodies, if it is saved in STEP. They are named "Material 1", "Material 2" and so on.
  • Edging — "Material edge 1", "Material edge 2" and so on is created for each material and assigned along the whole outline of the part. If the material is thinner than the production limit for edging, the import warns about it — remove the edging from such parts before the order is created.

What you have to do yourself

  • Materials and edging. The real materials and edging are not stored in STEP, so the matching wizard opens before the order is created: pick materials and edging for them from the catalogue.
  • Edging along the outline. It is assigned along the whole outline of the part — remove it where edging is not needed.
  • Service and furniture bodies. They are not added to the order (for example, hardware elements); the import shows their number in a warning.

What this import does not do

  • It does not carry over hardware: bodies whose names look like hardware (hinges, runners, handles, feet, fasteners) are dropped together with service bodies and counted in the warning.
  • It does not read material or edging names: materials are told apart only by thickness and body colour, and the order receives “Material 1”, “Material 1 edging” and so on.
  • It does not read the edging thickness: every edging gets 1 mm — check it and set it in the order.
  • It does not merge identical parts: each panel arrives as a separate row with a quantity of one.
  • Anything too thin or too small is dropped silently: a part is a panel between 0.4 and 80 mm thick whose face sides are both at least 30 mm.

If the file did not open

The SolidWorks import is still under testing. The messages "Could not read the SolidWorks STEP", "The SolidWorks STEP contains no readable assembly" and "No sheet parts were found in the SolidWorks STEP" mean that the structure of the file differs from the known one. Proceed in two steps:

  1. Check that the file meets the conditions above: saved as STEP AP214 or AP242, contains one assembly, the ZIP holds a single STEP, the size is no more than 128 MB.
  2. If everything is correct, contact support and attach the original file.

After the upload, check the result before the order is created.

See also