Platform News

The personal production account now has a My machines section: you add your own equipment, and programs are prepared for exactly that machine.

• A machine card with the Machine and Tools tabs — everything in one place.
• The machine role is chosen explicitly: cutting, edge banding or CNC.
• Your own drills: diameter and mounting sides.
• Your own post-processor from the list that fits this role.
• Every parameter comes with a hint in your language.

Until you add your own machines, the account keeps using the company machines.

The old import paths have been switched off. Projects are loaded through the new module — on a separate page in your personal account or in the CRM.

• Basis: you need the new exporter script from the import page, which produces JSON. The former .project format is no longer supported.
• 3D-Constructor: a separate button, both .project and DXF are supported.
• Before loading into an order you can see the assembly in 3D and the list of products.
• If you try the old way, the system tells you what to do.

Areas and service quantities are calculated to three decimal places.

• The area totals in the order and in the blank agree with each other and with a manual calculation.
• Cutting metres no longer lose the third digit.

Prices still use two decimals — the amounts payable are unaffected.

Automatic hardware drilling during project import has become smarter.

• The system recognises the type of joint between parts: edge to face, face to face, single fixing.
• The offset, depth and orientation of the hole are calculated from the real thicknesses of the parts being joined.
• Name synonyms: one rule covers several names of the same fixing.
• A hardware catalogue with an editing table — you can maintain the rules yourself.

Choosing a processing template is now predictable while you are still browsing the catalogue.

• The minimum part size is shown right on the template card.
• It is the same value the project check compares against later — separately for a part with edging and without it.
• Operations cannot be placed on a part that has no dimensions.

A large piece of work on milling paths — the kind you see right on the cut edge.

• For a straight line along the side of a part the lead-in and lead-out are built automatically: the tool enters outside the part outline, not inside its body.
• The lead-in arc radius is chosen to match the size of the pocket, and in tight pockets a gentler option is used.
• Through pockets at the edge of a part are closed with an overlap — no web left at the exit.
• Cutter selection for trimming takes the free clearance at the exit point into account: fewer part flips on the machine.
• Complex contours with separated lead-in paths are handled correctly.

The selection of the drill for a dowel has been refined.

• The nominal size is 5.0 mm, and 5.5 mm for thin AGT boards.
• The range of acceptable drills is counted from the nominal size, so more of the tooling you actually own gets used.
• The diameter for the connecting fitting on a thin panel is aligned across all related templates.

A large audit of furniture-project import from Basis CAD has made the import of drillings, grooves and pockets noticeably more accurate. The changes are additive: for correct data nothing changes, but ambiguous and incomplete cases are now handled reliably.

Drillings

• The hole type (through or blind) is taken from the project data rather than only guessed from geometry — fewer errors when the part axes are assembled incorrectly.
• A hole with only one dimension set (radius or diameter) is no longer lost — the other dimension is calculated automatically.
• A blind hole that almost reaches the opposite side is cut through — the machine no longer tries to leave a film that cannot physically be made.

Grooves

• For curved, radius and multi-segment grooves the depth is taken from the real intersection of the cutter with the part, not from the "drawn" contour — the actual cut depth goes to the machine.

Pockets

• An empty or invalid depth no longer slips through silently — a safe value is substituted with a warning.
• A through pocket from either side of the part is clamped to its thickness the same way — it never exceeds the thickness.

The personal cabinet now has a "Delivery addresses" section — the client's personal address book. Saved addresses are filled in at checkout, so you don't have to enter the data again. Addresses are tied to your account and do not depend on which firm you are currently working under.

How to add an address

• Pick a firm (if you have several) and a delivery method — the set of available methods depends on the firm's country and settings.
• Fill in the form: the set of fields changes to match the chosen method and recipient type, and required fields are marked with an asterisk.
• Save — the server validates the data and points out anything filled in incorrectly.

Delivery methods

• Courier and Nova Poshta (for Ukrainian firms), SAT — with a choice of address delivery or a branch.
• International delivery (for non-Ukrainian firms) — a simplified form.
• Self-pickup — with the firm's warehouse; the warehouse address can be pre-filled with your default sale point.

Default sale point

In the "Overview" section you can set a preferred sale point for a firm once — it is saved in your account and is no longer asked for on every order, and it is also filled in automatically as the warehouse address for self-pickup.

The production cabinet now has a "Prices" tab: you can set your own prices for services and materials — separately from the firm's general price list that other clients see. The feature is available with paid cabinet access.

How it works

• Download the price list — an .xlsx file in the cabinet language with "Services" and "Materials" sheets and a help sheet. Each row has: identifier, category, name, unit, sale method, currency and price.
• Change the prices — only the "Currency" and "Price" columns are editable, the rest are protected. Unchanged rows are skipped on upload.
• Upload the file back — it is checked for format and viruses and processed in the background, with no waiting.

Transparent and safe

• If there is no personal price for an item, the order uses an empty default price (euro), not the firm's general price. Someone else's price is never substituted for yours.
• All export and import jobs are visible in the "Job history" with status and a report: how many prices were updated, what stayed unchanged, and what errors occurred. Files and reports are kept for 7 days.